Women's

High quality comfortable gloves, safe for sports riding. Manufactured with great emphasis on comfort, especially for racing use.

New Sport Cup plus EVO is our affordable variant of racing gloves.

Both pro and hobby riders will love all safety features like little finger and ring finger joint, reinforces palm and double fastening.

4SR motorbike gloves Sport Cup Plus EVO Neon:

• leather sport gloves made of goatskin / black, fluo yellow, fluo red /
  
• precurved sports design
• ergonomic shape of the fingers ensures better comfort for your hands
• outer seams ensure comfortable wear
• little finger and ring finger are joined to reduce the risk of injury
• plastic joint protector
• Poreten knuckle protectors
• double fastening ensures the glove stays in place if you happen to fall

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Camo:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

Knee sliders made of resistant plastic material, essential accessory for extreme lean lovers.

Knee sliders made of resistant plastic material, essential accessory for extreme lean lovers.

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Gray:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

We know there is nothing like it; when you start the engine and feel the indomitable force that pushes you forward. Adrenalin goes through you and you want to be faster and perhaps, the fastest!

But before you go fast you need high quality professional grade equipment. That’s exactly what the TT Replica Black Series is as its features & functions are taken straight from the top line 4SR racing suits.
Its racing pedigree is evident with its racing hump that guarantees proper aerodynamics and race type mobility that is ensured with its flexible panels.
 

4SR TT Replica Black Series leather jacket:

• 1,2 mm cowhide leather / black /
• 4SR Elbow down TECH - replaceable elbow sliders
• Race proven in BSB external PU slider protectors
• high quality protectors Safe Tech on the shoulders and elbows, certificated in accordance with EN 1621-1:2012 Level 2 T+
• all protectors are completely detachable
• A local perforation system will make riding pleasant even on hot summer days.
• Large accordion stretch panels helps movement and comfort
• YKK zippers
• Pre-curved sleeve
• Extended tail
• Racing hump
• short sports collar
• kevlar stretch cuffs
• double and triple seems
• variable waist
• two outside pockets and three inside pockets
   
• jacket is already equipped with certified back protector Sas-Tec
• jacket can be also equipped with certified chest protector Sas-Tec
• connection with leather trousers and jeans through long and short zipper

Replaceable Elbow Down TECH Sliders come in a variety of colour options, such as Standard Red, Fluorescent Red, Fluorescent Yellow, Green and more.

 

Replacement elbow sliders for your 4SR suit with Elbow Down TECH

• Sold in pairs
• Thermoplastic polyurethane
• Easy replacement
• Transparent base is not included
  
  

We know that in many situations wearing a full-fledged back protector can be impractical, so we decided to offer an appropriate solution. Thanks to the cooperation with European top designers of safety protectors, you can now buy insert back protectors for all 4SR jackets and suits from model year 2009. It´s made of elastic but strong Polyurethane. This material has a memory effect, which allows shaping to any form, it´s comfy and very effective. This protector can be easily inserted in the pocket in a jacket or a suit and your back is safe. 4SR back protector meets the highest protection requirements according to EN1621-2 Level 2 norm.

It is necessary to buy a protector, which size corresponds with the size of your jacket.
Beware of different types of older jackets and suits. You are advised to carefully check the shape of your pocket

For many years we have been producing women's racing suits through our custom suit department, but with an increasing number of female track day riders and racers, we’re making our world class race suits available to all.

Our motorcycle suits are frequently used at the BSB championship, one of the most dangerous superbike competitions. Since the suits are exposed to maximum strain during frequent fall-downs, we ensure the quality protectors are placed correctly.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"

Mobility is very important for a racer, and you will find an extensive use of seamless Aramid stretch panel in the crotch, underarm and at the back of the knee, allowing a rider to easily move around the bike, for extra comfort we use a soft fabric at the cuffs.

 

4SR two-piece women's suit RR Lady Power AR:

• 1,2 mm cowhide leather / black, white, grey /
• high quality protectors Betac on shoulders, elbows and knees, certificated in accordance with EN 1621-1:2012 Level 2
• original YKK zippers
• local perforations underarm
• 3D mesh lining
• extensive Aramid stretch for maximum flexibility
• better shaped leather panels at the back area of the suit will take care of perfect mobility
• aerodynamic speed hump, hydro-bag compatible
• use of triple seams & patented, double 4SR seam at more stressed points
• soft stretch cuffs
• comfortable collar
• reflective logo on the collar
• two inside pockets
• longer back, jacket can be used separately
• including Elbow down TECH elbow sliders
• suit can be also equipped with certified chest & back protector Sas-Tec
• including knee and elbow sliders
• the suit does not include an airbag system, we will be happy to help you choose a suitable gear

• AR suit is compatible with In&motion® airbag systems, Alpinestars Tech-Air®
• if you wish, the leathers can be supplemented with an airbag data cable with control LEDs
• AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic

What does 4SR have and others don't:?

• You can attach the jacket from the two-piece suit to Motorcycle jeans
• Two-piece suits are perforated on the sides
• Aramid stretch under the armpits and crotch is seamless
• Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
• 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
• 4SR leather was tested by the TÜVRheinland® certification centre according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.

Black will always remain black, the colour of style & elegance. Using our proven custom suit template to fit the female figure, we can now offer a full-size range off-the-peg Airbag ready 2pc suit for lady bikers who want to attack the track.

For many years we have been producing women's racing suits through our custom suit department, but with an increasing number of female track day riders and racers, we’re making our world class race suits available to all.

Our motorcycle suits are frequently used at the BSB championship, one of the most dangerous superbike competitions. Since the suits are exposed to maximum strain during frequent fall-downs, we ensure the quality protectors are placed correctly.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"

Mobility is very important for a racer, and you will find an extensive use of seamless Aramid stretch panel in the crotch, underarm and at the back of the knee, allowing a rider to easily move around the bike, for extra comfort we use a soft fabric at the cuffs.

 

4SR two-piece women's suit RR Lady Black Series AR:

• 1,2 mm cowhide leather / black /
• high quality protectors Betac on shoulders, elbows and knees, certificated in accordance with EN 1621-1:2012 Level 2
• original YKK zippers
• local perforations underarm
• 3D mesh lining
• extensive Aramid stretch for maximum flexibility
• better shaped leather panels at the back area of the suit will take care of perfect mobility
• aerodynamic speed hump, hydrobag compatible
• use of tripple seams & patented, double 4SR seam at more stressed points
• soft stretch cuffs
• comfortable collar
• reflective logo on the collar
• two inside pockets
• longer back, jacket can be used separately
• including Elbow down TECH elbow sliders
• suit can be also equipped with certified chest & back protector Sas-Tec
• including knee and elbow sliders
• the suit does not include an airbag systém, we will be happy to help you choose a suitable gear

• AR suit is compatible with In&motion® airbag systems, Alpinestars Tech-Air®
• if you wish, the leathers can be supplemented with an airbag data cable with control LEDs
• AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic

What does 4SR have and others don't?:

• You can attach the jacket from the two-piece suit to Motorcycle jeans
• Two-piece suits are perforated on the sides
• Aramid stretch under the armpits and crotch is seamless
• Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
• 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
• 4SR leather was tested by the TÜVRheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Neon: 

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council

High-quality & very fine perforated gloves you will love to wear in summer.

Monster lady EVO gloves has undergone a design evolution. They have an extended cut in the wrist area, palm reinforcement and double leather overlay over the outside of your little finger. You can control your phone's screen using a thumb, which is made of touch screen leather.

4SR fully perforated biker gloves Monster Lady Evo brown:

• leather gloves made of waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• thumb is made of touch screen leather
• reinforced palm
• knuckle protectors
• laser made decoration

High-quality & very fine perforated gloves you will love to wear in summer.

Monster lady EVO gloves has undergone a design evolution. They have an extended cut in the wrist area, palm reinforcement and double leather overlay over the outside of your little finger. You can control your phone's screen using a thumb, which is made of touch screen leather.

4SR fully perforated biker gloves Monster Lady Evo:

• leather gloves made of waxed goatskin
• ergonomic shape of the fingers ensures better comfort for your hands
• thumb is made of touch screen leather
• reinforced palm
• knuckle protectors
• laser made decoration

4SR Steel Cap with 3D embroidered logo & breathable mesh back.

Size of caps can be adjusted using the plastic, sliding panel.

• 3D Embroidered 4SR logo
• Flexfit® Trucker
• Curved peak
• Breathable mesh back
• Color: light grey, black

Timeless Classic

The new black-white-red variant is follow up of the popular leather motorcycle jacket Roadster Lady II. The jacket has undergone several modifications and improvements for practicality and safety. It comfortably wraps around the rider's body, pre-curved sleeves allow for a more comfortable riding position and a better grip on the handlebars, while flex panels inserted into the back of the shoulders provide the necessary flexibility during the ride. Air circulation is ensured by perforations on the inner sides of the sleeves, running from the armpits to the wrists, on the sides, and shoulder flex panels. On the other hand, in colder weather conditions hollow fiber thermal liner can be attached to the jacket. The thermal liner is part of the jacket.

 

Secure

Because rider's safety is our top priority at 4SR, the Roadster Lady III – Red jacket is equipped with state of the art Safe Tech protectors in the shoulder and elbow area, providing the highest Level of protection (certification level 2 T+). These protectors are so ergonomic that you won't even notice them. Additionally, the jacket is reinforced with two layers of leather in areas exposed during a fall - the shoulders, elbows, and lower back. A back protector can be inserted into the jacket. The jacket has the highest level of durability AAA (EN 17092-2 certification).

 

Practical

The Roadster Lady III – Red jacket has an extended back section, providing better protection against drafts and offering compatibility with Kevlar jeans through a short zipper or leather motorcycle pants with a long circumferential zipper. There are a total of five pockets for essential items - two external and one internal pocket can be closed with a YKK zipper, and two others with velcro.

 

4SR Leather Motorcycle Jacket Roadster Lady III – Red:

• 1.1 mm thick premium cowhide /black, pearl white, red/
• YKK zippers
• state of the art Safe Tech protectors certified according to the highest standard EN 1621-1:2012 LEVEL 2 T+
• all protectors are removable
• the jacket has the top protection AAA certification (EN 17092-2)
• local perforation ensures jacket ventilation on hot summer days
• stylish details - quilted shoulders, flexible panels in the back of the jacket
• short sporty collar
• two external and three internal pockets
• removable thermal liner
• adjustable waist straps
• ergonomic fit with extended back
   
• choice to insert a back protector
• possibility to attach kevlar jeans with a short or motorcycle pants with circumferential zipper
   

Sporty motorcycle jeans that are properly fitted to maximize comfort and keep that sports style and feel! These are the new GTS Lady jeans from the 4SR.

Flexible and elastic, high-waisted jeans with variable waist ensure comfort and mobility while riding your motorcycle.

Like any other garment we produce at 4SR, the GTS Lady are equipped with quality knee protectors, which are of course to the highest level 2 T + certification and with the ergonomic 3D shape of the protector not only protects the knee but also the shin.

Thanks to the development of our professional riders along with our experience in the world of motorcycle and world championship motorcycle racing, we know that the right shape of the protector is one of the most important aspects.

4SR Jeans are still the only motorcycle jeans on the market that have the fixation of the guards in the right place and meet the highest standard requirements. 4SR have the patented AFS - Armor Fixation System.

How does the 4SR AFS work? The trousers have a loose elastic stocking that holds the knee and shin protector in place and is independent from the top layer of material. So you still have the protector in the right place, while enjoying the freedom and movement of safe Kevlar jeans.
Additionally, you can adjust the protector up and down to position them exactly where you feel most comfortable according to your height.

TESTED BY HUMANS

4SR kevlar motorcycle jeans GTS Lady blue:

• 14 ounce blue denim
• reinforced with DuPont™ Kevlar® fiber on the knees and hips
• high quality Safe Tech knee protectors, EN 1621-1: 2012 LEVEL 2 T+ certified, adjustable to fit your height. The protectors are fixed in our patented pocket that is found on no other type of motorcycle jeans!
• memory protectors Viscofoam on the hips
• anatomical design of knees
• 4SR motorcycle jeans can be also equipped with certified hip protectors Sas-Tec
• high-waisted, zipper for connection with 4SR jackets
• stitched front pockets don't kill the silhouette
• textile bag packaging

4SR Multicam Black Cap with breathable mesh back & white 3D logo.

Size of the cap can be adjusted using the plastic sliding panel.

• colour: camo, black
• type: Trucker, Snapback
• embroidered 4SR logo in white 3D
• curved peak
• breathable mesh back
• unisex

Stylish cap, trucker style, has a mesh at the back for perfect ventilatation. The bent visor with decorative stitching is practical and comfortable to wear. The size of the cap can be adjusted using a plastic sliding panel with clips (snapback).

The cap is made from recycled materials and is recyclable, so it is environmentally friendly and contributes to environmental protection.

• colour: black
• type: Trucker, Snapback
• bent visor
• 3D embroidery 4SR on the front
• embroidered inscription FOR STREET RACING on the side of the cap
• mesh back for better ventilation
• unisex
• onesize
• made from recycled material

High quality comfortable gloves, safe for sports riding. Manufactured with great emphasis on comfort, especially for racing use.

New Sport Cup plus EVO is our affordable variant of racing gloves.

Both pro and hobby riders will love all safety features like little finger and ring finger joint, reinforces palm and double fastening.

4SR motorbike gloves Sport Cup Plus EVO Black:

• leather sport gloves made of goatskin / black /
• precurved sports design
• ergonomic shape of the fingers ensures better comfort for your hands
• outer seams ensure comfortable wear
• little finger and ring finger are joined to reduce the risk of injury
• plastic joint protector
• Poreten knuckle protectors
• double fastening ensures the glove stays in place if you happen to fall

Bordeaux snapback with white 3D logo.

Size of caps can be adjusted using the plastic, sliding panel.

• 3D Embroidered logo 4SR
• Flexfit® Snapback
• Color: Maroon red, white

4SR Yellow Snapback with black 3D logo.

Size of caps can be adjusted using the plastic, sliding panel.

• 3D Embroidered logo 4SR
• Breathable mesh back
• Flexfit® Snapback
  
• Color: Yellow, black

4SR Outline Grey Snapback with black 3D logo.

Size of caps can be adjusted using the plastic, sliding panel.

• 3D Embroidered logo 4SR
• Flexfit® Snapback
• Color: Grey, black

Knee sliders made of resistant plastic material, essential accessory for extreme lean lovers.

Replaceable hydrobag drinking straw for hydrobag 4SR. 4SR Hydrobag is a practical and often used helper in endurance motorcycle racing, it is also suitable for summer rides. 

4SR replaceable hydrobag drinking straw:

• Material: Termoplastic Polyurethane TPU, BPA-free
• Diameter of a tube 1 cm
• Match with 4SR Hydrobag
• Excludes hydration bladder

Black will always remain black, the color of style & elegance. Using our proven custom suit template to fit the female figure, we can now offer a full size range off-the-peg 2pc suit for lady bikers who want to attack the track. 

For many years we have been producing womens racing suits through our custom suit department, but with an increasing number of female track day riders and racers, we’re making our world class race suits available to all.

Our motorcycle suits are frequently used at the BSB championship, one of the most dangerous superbike competition. Since the suits are exposed to maximum strain during frequent fall-downs, we ensure the quality protectors are placed correctly.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"

Mobility is very important for a racer and you will find an extensive use of seamless Kevlar stretch panel in the crotch, underarm and at the back of the knee, allowing a rider to easily move around the bike, for extra comfort we use a soft fabric at the cuffs.

 

4SR two-piece women's suit RR Lady Black Series:

• 1,2 mm cowhide leather / black /
• high quality protectors Betac on shoulders, elbows and knees, certificated in accordance with EN 1621-1:2012 Level 2
• original YKK zippers
• local perforations underarm
• 3D mesh lining
• extensive Aramid stretch for maximum flexibility
• better shaped leather panels at the back area of the suit will take care of perfect mobility
• aerodynamic speed hump
• use of tripple seams & patented, double 4SR seam at more stressed points
• soft stretch cuffs
• comfortable collar
• reflective logo on the collar
• two inside pockets
• longer back, jacket can be used separately
• including Elbow down TECH elbow sliders
• suit can be also equipped with certified chest & back protector Sas-Tec
• including knee sliders
  
  

What does 4SR have and others don't?:

• You can attach the jacket from the two-piece suit to Motorcycle jeans
• Two-piece suits are perforated on the sides
• Aramid stretch under the armpits and crotch is seamless
• Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
• 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
• 4SR leather was tested by the TÜVRheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.

4SR Hydrobag is a practical and often used helper in endurance motorcycle racing, it is also suitable for summer rides. Simply insert the hydrobag into the aerodynamic hump. Due to its shape, it can also be inserted into the most manufacturers' tracksuits.

4SR Hydrobag:

• Material: Termoplastic Polyurethane TPU, BPA-free
• Volume 0,5l
• Size: 20cm x 11cm x 6cm
• Replaceable hydrobag drinking straw included
• Universal use

We are racers! 4SR socks are suitable for sneakers, where the logo / inscription will be visible. These silver fibre socks were designed to create a healthier environment for your feet.

4SR antibacterial Socks We Are Racers Black:

• 80% cotton, 15% Polyamide, 5% elastane
• with silver technology
• quality elastic material
• ribbed cuffs
• Colour: Black, White
• Sizes: 36-41, 42-45

We are racers! 4SR socks are suitable for sneakers, where the logo / inscription will be visible. These silver fibre socks were designed to create a healthier environment for your feet.

4SR antibacterial Socks We Are Racers Black:

• 80% cotton, 15% Polyamide, 5% elastane
• with silver technology
• quality elastic material
• ribbed cuffs
• Colour: Black, White
• Sizes: 36-41, 42-45

Ankle compression socks from 4SR has the perfect length to wear with leathersuit. Thanks to the compression fibres, they are pleasantly compressive on the foot and suitable for all kinds of sports.

4SR ankle compression socks Logo:

• 95% Polyamide, 5% elastane
• compression socks
• ankle high
• perforated logo on the instep
• Color: White
• Sizes: 36-41, 42-45

The knitted pom beanie by 4SR can be worn in two ways- with a turn-up brim or in a long version.

4SR winter pom beanie:

• 95% Acrylic, 5% Elastan
• High-weight double material
• Leather label with 4SR logo
• The pom can be easily removed
• Colour: light marl, dark mark

  Do You Have Any Questions?

The Longrey winter knitted beanie from 4SR has an extended cut.

4SR winter beanie Longrey:

• 95% Acrylic, 5% Elastan
• Colour: light grey marl, dark grey

  Do You Have Any Questions?

Black, winter beanie Logo by 4SR with the colour rubber patch logo of your choice!

4SR beanie Logo Black with rubber patch:

• 95% Acrylic, 5% Elastan
• High-weight double material
• Colourful rubber patch
• Colour: black

  Do You Have Any Questions?

Yellow, winter beanie Logo by 4SR with the colour rubber patch logo of your choice!

4SR beanie Logo Honey with rubber patch:

• 95% Acrylic, 5% Elastan
• High-weight double material
• Colourful rubber patch
• Colour: dark yellow

  Do You Have Any Questions?

Sporty motorcycle jeans that are properly fitted to maximize comfort and keep that sports style and feel! These are the new GTS Lady jeans from the 4SR.

Flexible and elastic, high-waisted jeans with variable waist ensure comfort and mobility while riding your motorcycle.

Like any other garment we produce at 4SR, the GTS Lady are equipped with quality knee protectors, which are of course to the highest level 2 T + certification and with the ergonomic 3D shape of the protector not only protects the knee but also the shin.

Thanks to the development of our professional riders along with our experience in the world of motorcycle and world championship motorcycle racing, we know that the right shape of the protector is one of the most important aspects.

4SR Jeans are still the only motorcycle jeans on the market that have the fixation of the guards in the right place and meet the highest standard requirements. 4SR have the patented AFS - Armor Fixation System.

How does the 4SR AFS work? The trousers have a loose elastic stocking that holds the knee and shin protector in place and is independent from the top layer of material. So you still have the protector in the right place, while enjoying the freedom and movement of safe Kevlar jeans.
Additionally, you can adjust the protector up and down to position them exactly where you feel most comfortable according to your height.

TESTED BY HUMANS

4SR kevlar motorcycle jeans GTS Lady:

• 14 ounce black denim
• reinforced with DuPont™ Kevlar® fiber on the knees and hips
• high quality Safe Tech knee protectors, EN 1621-1: 2012 LEVEL 2 T+ certified, adjustable to fit your height. The protectors are fixed in our patented pocket that is found on no other type of motorcycle jeans!
• memory protectors Viscofoam on the hips
• anatomical design of knees
• 4SR motorcycle jeans can be also equipped with certified hip protectors Sas-Tec
• high-waisted, zipper for connection with 4SR jackets
• stitched front pockets don't kill the silhouette
• textile bag packaging

Once again, we have made progress in development and we are happy to introduce a new model of the best gloves from 4SR. The Stingray Race Spec racing motorcycle gloves have been created with an emphasis on safety and maximum flexibility. 

Riders often prefer comfort and the feel of their fingers in the gloves over high-level protection, but we all know that this is not exactly ideal, and that is why we have focused on joining these conflicting demands.

The fingers controlling the levers have flexible panels built-in at the joint, which do not resist bending and thus enable sensitive touch control of the brakes and clutch. This reduces pressure on the tendons and minimizes the risk of cramps. The entire glove is anatomically pre-closed for better grip on the handlebars. For maximum comfort, external stitching is used.

The edge of the hand is sturdy, equipped with an Antishock system made of Viscofoam material with a memory effect. Because the pinky finger is hit in the vast majority of falls, it is conjoined to the ring finger to increase its protection.

The palm is usually the part of the glove that must resist abrasion well. Kevlar fibers and stingray skins are also used in the area of the palm. That is then backed by Viscofoam memory foam which protects the shuttle bone. The skeleton of the palm, including the fingers, is made of very fine Pittards leather, which is 2x more durable than kangaroo leather.

To protect the joints, it was necessary to develop a new protector made of flexible material and at the same time resistant to abrasion. The energy of the impact is distributed within the area and partially absorbed by the protector. Additional energy is absorbed by the Viscofoam layer below it. For the glove to fit properly, the dimensions of this protector correspond to the size of the glove

4SR racing gloves Stingray Race Spec Blue:

• full leather sport, motorcycle gloves designed for racing use
• The palm and shuttle bone protector is made of 100% stingray skin
• flexible panel to reduce pressure on the joints
• ergonomically shaped palm and fingers for better grip on the handlebars
• the use of external stitching guarantees driving comfort
• the conjoining of the pinky finger and ring finger reduces the risk of injury
• plastic protectors on joints and finger joints for greater safety
• Anti-shock system made of clever Viscofoam® foam on the wrist, joints, ridge, and finger joints ensures the
• distribution of energy during a fall and its subsequent mitigation
• inner lining made of DuPont-Kevlar® Kevlar fabric
• CE according to EU Regulation 2016/425 of the European Parliament and the Council